PRODUCT DETAIL:
The Steering Stand design is suitable for standing or sitting positions based on the ergonomic principles of height (11244mm).
Aseparate unit is used for each purpose allowing for excellent functional expandability and operability. However, all components within the stand can easily be incorporated into a panel and cockpit bridge console due to their compact design which is about 80% smaller when compared with our preous models.
In addition to the independent follow-up circuit, the automatic and hand steering control systems are also independent of each other.
A course setting dial (25 0/r) has been incorporated along with its associated set course indicator utilizing high intensity red LED Displays.
The function keys are easy to use and understand with pictorial characters for every function to help reduce the possibility of an incorrect/accidental command.
In addition, we have provided two heading input circuits. Thus by allowing a secondary heading signal from an external magnetic compass or DGPS. This provides a back up to the heading signal generated by the Gyrocompass. The PT500 can also track and route information feed from either a DGPS, INS or ECDIS System.
The PT500 includes three different modes of the course keeping for automatic steering:
- PID.
- Rate Constant Control.
- Fixed radius course altering control.
Various optional units include:
- Upright type PID Control unit PB345
- NFU Steering Unit PH727
- Dial Steering Unit PT161
- Portable Remote Unit PT154
- Override Unit PH725
- Digital Remote Controller PT162
Power:
- Main Power: 220/380/440AC +/-20% 50/60Hz +/- 1 or 3 Phase 700 VA
- Enunciator: 24VDC
Input Signal:
- Speed Signal PT500A for Adaptive Control & PT500D for the lower speed band control (optional).
- Pulse signal: 200PPNM
- Output Circuit: Photo Coupler 5VDC @ 2mA.
Gyrocompass Heading Signal:
- Serial Signal: NMEA0183Transmission: ASYNC Serial Data
- Baud Rate: 1200/2400/4800/9600
- Output Interval: 100ms ~ 20s (100ms Interval)
- Data Format: Start 1 bit, Data 7/8 bits, Stop ½ bits, Parity none/odd/even
- Header: 5 ACSII Letter
- Position data: Set data based on the location of commas
- Checksum: Yes or No
- Input Circuit: Photo Coupler
External heading signal for back up at auto steering unit:
- Serial Signal: NMEA0183
- External Devices: DGPS, Magnetic Compass or Second Gyrocompass
- Transmission: ASYNC Serial Data
- Baud Rate: 1200/2400/4800/9600
- Output Interval: 100ms ~ 20s (100ms Interval)
- Data Form: Start 1 bit, Data 7/8 bits, Stop ½ bits, Parity none/odd/even
- Header: 5 ACSII Letter
- Position data: Set data based on the location of commas
- Checksum: Yes/No
- Input Circuit: Photo Coupler
Output Signal:
- Course deviation/rudder angle/rate of turn steering mode signal
- Analog rudder angle signal
- Analog course Deviation Signal
- Buzzer Stop Signal
- No Voltage Alarm Contact Signal
- Performance Specification
- Environmental Conditions
